Do you know the operating procedures of Slurry Pump Manufacturers china? Let's have a simple understanding together!
1. Check before starting: all connecting parts should be tightened; the electric rotation direction should be correct; the clutch is flexible and reliable; the pipeline connection is firm, the sealing is reliable, and the bottom valve is flexible and effective.
2. Before starting the submerged Slurry Pump Manufacturers china, the suction pipe, bottom valve and pump body must be filled with water, and the upper end of the pressure gauge buffer must be filled with oil.
3. Rotate by hand to make the piston reciprocate twice. No-load can be started when there is no obstruction and the line is well insulated. After starting, the load can be gradually increased after the operation is normal.

4. Pay attention to the sealing condition of each sealing device during operation, and adjust it if necessary. The tie rod and auxiliary rod should be lubricated frequently.
5. During operation, the sand content of mud should not exceed 10%.
6. For Slurry Pump Manufacturers china with several speeds, in order to make splash lubrication reliable, several speeds should be operated separately in each shift, and the time should not be less than 30 seconds.
7. It is strictly forbidden to change gears during operation. When changing gears, the pump should be stopped to change gears.