Before starting the Slurry Pump Wholesale Price, please check whether the water inlet and outlet pipes are blocked, whether the front and rear bearings are filled with butter, and check whether the packing is full. When working, a high-pressure clean water pump should be equipped, and the clean water greater than the pressure of the Slurry Pump Wholesale Price should be transported to the leak-proof packing to protect the packing. The flushing pump should not be turned off during work, otherwise, the sealing part will be rapidly worn. Whether the clearance between the impeller and the guard plate is reasonable has a great influence on the life of the Slurry Pump Wholesale Price. If the clearance is unreasonable, the pump will generate vibration and noise during operation, and the overcurrent components will be damaged quickly. Therefore, when replacing the impeller, care should be taken to make the clearance meet the requirements of the drawing, and the clearance adjustment can be done through the adjustment screws on the rear bearing body. The allowable suction range of Slurry Pump Wholesale Price is measured when conveying clean water, and the influence of mud on suction capacity should be considered when pumping mud.

The above is a brief introduction to the knowledge related to the precautions of Slurry Pump Wholesale Price.